Jump to the NABCEP notes
Get Solar Certified notes on the NABCEP PV Associate and PVIP exams

NABCEP solar credentials · sources checked November 2026

NABCEP certifications: which one fits your solar work

A NABCEP certification is a voluntary, exam-based credential issued by the North American Board of Certified Energy Practitioners, a nonprofit that tests people who sell, design, install, inspect and maintain solar PV, solar heating and battery systems. Its credentials sit on two tiers. The entry tier holds two Associate credentials, the NABCEP PV Associate (PVA) and the newer O&M Associate Technician (OMAT), and neither needs field experience if you take a qualifying course. Most of the board certifications above them, led by the NABCEP PV Installation Professional (PVIP), ask for documented projects, OSHA training and advanced training hours. This page sets the family side by side; the PV Associate and the PVIP each get five pages of their own.

PV Associate and PVIP side by side

Parameter PV Associate Associate, not board certified PVIP Board certification
Questions [AHB] [CBH] 70 (60 scored) 70 (60 scored)
Testing time [AHB] [CBH] 2 h 4 h
Pass mark [AHB] [CBH] [FAQ] [JTA] 65 scaled 70 of 99 scaled
Application + exam fee [AHB] [FEES] [BE] $150 $25 + $125 $500 $125 + $375
Term before renewal [AHB] [CBH] [REN] 3 years 3 years
Code edition [AHB] [CBH] [FAQ] [REF] NEC 2017 and 2023 NEC 2017

Associate tier, board tier: where the line falls

The board keeps the two words apart, and so should a résumé. The Associate is a credential: it shows you know PV fundamentals well enough to work under supervision, and holders go into the board's Associate Directory without a digital badge. A board certification is a claim about professional practice, and it is what the phrase NABCEP Board Certified refers to.

The gap shows in the entry rules. The PV Associate opens three routes: a course with an Associate Registered Training Provider, documented PV work instead of a course, or converting an old Entry Level award. The PVIP asks for OSHA 10 training, 58 hours of advanced PV training and 6 Project Credits, and the credits must come from permitted, inspected systems on which you made the decisions.

The tiers connect. On a PVIP application, an active Associate credential is worth 18 of the 58 training hours, so starting at the bottom shortens the climb rather than repeating it.

The NABCEP family in one table

More columns to the right →

Credential What kind of credential Requirements to apply Exam length in questions Testing clock Passing threshold Fees to apply and sit
PV Associate NABCEP PV Associate (PVA) Associate, not board certified Course, 6 months of work, or EL conversion 70 (60 scored) 2 h Scaled 65 $25 + $125
OMAT NABCEP Operations & Maintenance Associate Technician (OMAT) Associate (O&M) Course or 6+ months of work — — Scaled 65 $25 + $125
PVIP NABCEP PV Installation Professional (PVIP) Board certification OSHA 10 + 58 h + 6 credits 70 (60 scored) 4 h Scaled 70 of 99 $125 + $375
PVIS NABCEP PV Installer Specialist (PVIS) Board certification OSHA 10 + 24 h + 6 credits 70 (60 scored) 4 h Scaled 70 $125 + $375
PVDS NABCEP PV Design Specialist (PVDS) Board certification OSHA 10 + 24 h + 12 credits 70 (60 scored) 4 h Scaled 70 $125 + $375
PVTS NABCEP PV Technical Sales (PVTS) Board certification OSHA 10 + 58 h + sales credits 70 (60 scored) 4 h Scaled 75 $125 + $375
PVCMS NABCEP PV Commissioning & Maintenance Specialist (PVCMS) Board certification OSHA 30 + 24 h + 12 credits 70 (60 scored) 4 h Scaled 70 $125 + $375
PVSI NABCEP PV System Inspector (PVSI) Board certification No prerequisites 45 (40 scored) 2 h Scaled 65 $150
SHSI NABCEP Solar Heating System Inspector (SHSI) Board certification No prerequisites 45 (40 scored) 2 h Scaled 65 $150
ESIP NABCEP Energy Storage Installation Professional (ESIP) Board certification OSHA 30 + 58 h + 6 credits 70 (60 scored) 4 h — $125 + $375
SHI NABCEP Solar Heating Installer (SHI) Board certification Experience categories 70 (60 scored) 4 h Scaled 75 $125 + $375

From NABCEP's 2025 Certification Handbook, Associate Handbook, FAQ and fee schedule, read November 22, 2026. A dash means the sources we read give no figure.

Two rows need a caution. The specialist board exams for inspectors, the PV System Inspector (PVSI) and the Solar Heating System Inspector (SHSI), are shorter and are taken online only. The Solar Heating Installer (SHI) is still in the 2025 handbook and the fee schedule, but missing from NABCEP’s Board Certifications page; ask the board whether it accepts applications before you plan around it.

Solar roles, credential by credential

Match the line closest to your week, then read the row for that credential in the table above.

  • Finishing a PV course with an Associate Registered Training Provider: the PV Associate, with the provider registering you.
  • Enough full-time solar work for the experience pathway, but no course: the same Associate credential, applying on experience.
  • Starting out on operations and maintenance crews: the O&M Associate Technician (OMAT), the second Associate credential.
  • Holding an Entry Level Achievement Award from before the rename: the Associate, by conversion.
  • Leading residential or commercial installs that pass permit and final inspection: the PV Installation Professional.
  • Trained and OSHA-carded, but still short of installations: the PVIP exam as Board Eligible, then the credits.
  • Installing with fewer classroom hours behind you: the PV Installer Specialist (PVIS).
  • Drawing system designs and plan sets: the PV Design Specialist (PVDS).
  • Qualifying customers, quoting and selling systems: PV Technical Sales (PVTS).
  • Commissioning and servicing arrays, with service projects already logged: the PV Commissioning and Maintenance Specialist (PVCMS).
  • Reviewing plans or inspecting finished systems: the PVSI, or the SHSI for solar heating.
  • Installing battery storage: the Energy Storage Installation Professional (ESIP).
  • Pulling permits as a contractor: none of the above on its own, because that takes your state's license; the guide to solar installer certification compares the two.

What "NABCEP certified installer" means

When a company advertises a NABCEP certified installer, the claim should rest on a current installer board certification, the PVIP or the PVIS. Two look-alikes fall short of it. An Associate holds a credential, not a certification. A Board Eligible candidate has passed the board exam without the installations, and has 3 calendar years to earn the credits; nobody in that position is certified until the conversion.

A certified PVIP gets a Credly badge and a place in the directory of Board Certified professionals, and that directory is the place to check a name. A listing disappears when a certification lapses, so a name missing from it is worth a question.

PV Associate and PVIP, page by page

NABCEP PV Associate

Overview and eligibility · practice questions · the six domains, one by one · exam format and pass mark · cost and application

NABCEP PV Installation Professional

Overview and requirements · practice questions · the four domains, one by one · exam format and code book · fees and how to apply

The two exams follow different job task analyses and different code editions. The Associate exam has used a six-domain analysis since April 7, 2026, while the PVIP still follows the analysis dated December 2017 and allows only the NEC 2017 in the room.

4 warm-up questions from the PV Associate and PVIP sets

Score: 0 of 0 picked correctly · 4 items here

Q1 · PV Associate · Safety · 20%

At noon, an installer opens the PV disconnect next to a residential string inverter. Which conductors can still carry dangerous DC voltage?

One tap per item counts toward the score; opening the key first leaves the item unscored.

Skip ahead to the key and the reasoning

Opening the disconnect separates the inverter from the array, but the conductors between the array and the switch are still connected to the array and stay energized in daylight.

The inverter's output conductors carry alternating current from the utility side, not DC; the DC hazard sits upstream of the open switch.

The grounding electrode conductor normally sits at earth potential; it is not among the array's current-carrying circuit conductors.

An OFF handle only shows that the switch contacts are open; the wiring on the array side of the switch is still live in daylight.

Q2 · PV Associate · Core knowledge · 20%

Which residential setup can keep a home's backed-up loads running through a nighttime utility outage?

Skip ahead to the key and the reasoning

A grid-tied string inverter without storage shuts down when the grid fails, and at night it has no PV input anyway.

Grid-tied microinverters also stop exporting when the utility is down, and they produce nothing after sunset.

A multimode inverter can separate the backed-up circuits from the grid and run them from stored energy, the only source left after dark.

A tracker adds daytime output but no storage, so nothing runs the loads after dark.

Q3 · PVIP · System design · 32%

Under the 2017 NEC, what is the highest PV system dc voltage permitted on a one-family dwelling?

Skip ahead to the key and the reasoning

480 V is a common ac service voltage, not a dc cap; a dwelling string may legally run above it, up to the 600 V limit.

In the 2017 NEC, 690.7 caps PV system dc circuits on or in one- and two-family dwellings at 600 V, counted as the temperature-corrected maximum voltage.

1,000 V is the 2017 limit for dc circuits on other types of buildings, such as a commercial roof, not for a house.

1,500 V appears only for listed equipment that is not on or in a building; a house roof is on a building.

Q4 · PVIP · Installation · 38%

Four PV conductors will be pulled into one conduit. What is the maximum conduit fill allowed by NEC Chapter 9, Table 1?

Skip ahead to the key and the reasoning

Chapter 9, Table 1 limits a conduit holding more than two conductors to 40% of its cross-sectional area.

53% applies only when a single conductor occupies the conduit.

60% is allowed only in a nipple of 24 in or less, not a full conduit run.

80% is far above any Chapter 9 fill limit; even a single conductor is held to 53%.

Before you apply: NABCEP questions answered

Is a NABCEP credential required to install solar panels?

No. These credentials are voluntary, and NABCEP itself says a board certification neither replaces a state or local license nor bars anyone from installing PV. Whether you may contract for the work is your state's decision. The solar installer certification guide uses California's C-46 license as the example.

Can you get NABCEP certified online?

Largely, yes. The PV Associate and the PVIP both offer live remote proctoring, so either exam can be sat from your own desk; Meazure Learning's test centers are the other option. A PVIP retake or rescheduled sitting has to be at a center, and what cannot happen online at all is the field work: the installations behind a board certification have to be real, permitted projects.

How long does it take to get NABCEP certified?

It depends on the tier. On the Associate side, the course is the main variable: NABCEP sets no minimum length, and the table on the PV Associate overview gives the rest. On the board side, the Project Credits are the part no classroom can speed up, because only recent, permitted and inspected systems count.

What the bracketed tags point to